Manufacturer: D-Link

Power On the router. Locate the reset pin hole on the back. Use a sharp object to press it and hold it down for 5 seconds. Release. … Important: If that does not work, try pressing the button and holding it down for 10 seconds, release.

To find out your router default username and password continue reading

Turn OFF the router. Locate the reset pin hole on the back panel. Use a paper clip to press it and hold down for only about 5 seconds – don’t hold too long. Release. (You can also watch the lights on the front cover – it is time to release the button when M1 and M2 flash at the same time.)

To find out your router default username and password continue reading

The reset button/hole is located on the back panel – to the right. Power on the router and use a paper clip or another sharp object to press the button down and hold for 10 seconds. Release. Wait about 30 seconds for the reboot process to finish.

To find out your router default username and password continue reading

Power on the router. Find the reset “hole” on the back panel. Use a paper clip to press and hold the button down for 10 seconds. Release and wait about 30 seconds for the router to reboot. 

To find out your router default username and password continue reading

First open the back cover of your DIR-457 router. The reset pin hole is around the middle, next to the MicroSD card slot – check the picture above. Press the reset ‘hole’ button with a sharp object (paperclip) and hold for 5 seconds until the device restarts.

To find out your router default username and password continue reading

Find the reset button on the back panel of the router. It is actually a reset ‘hole’ so you will need a sharp object to press it down – a paper clip would do the job. Press and hold the button down for 10 seconds then release. Wait 30 seconds for the reboot process to finish. Your router is now set back to it’s default settings. 

To find out your router default username and password continue reading

Power on the router and press the reset button for 10 seconds. The reset button is located on the back of the router – it is placed in a small hole so you will probably need a sharp object (like a paperclip) to press and hold it down. Release and wait about 30 seconds for the router to reboot.

To find out your router default username and password continue reading

This router has a reset “hole” which is located on the back panel (next to the USB port). The router must be switched on. Use a sharp object such as a paperclip to press and hold the button (in the hole) down for 10 seconds. Release and wait about 30 seconds.

To find out your router default username and password continue reading