Hard reset NETGEAR RH348

To perform a hard reset of your Netgear RH348:


1. Find the Restore/Reset button on your router(usually located in a pinhole on the back of the router).
2. Use a paperclip or pencil tip to press and hold the button until the Power led starts to blink. It usually takes between 7 and 9 seconds.




To find out your router default username and password continue reading

Hard reset NETGEAR N600 Wireless Dual-Band Gigabit Router

To perform a hard reset of your Netgear N600 Wireless Dual-Band Gigabit Router:


1. Find the Restore/Reset button on your router(usually located in a pinhole on the back of the router).
2. Use a paperclip or pencil tip to press and hold the button until the Power led starts to blink. It usually takes between 7 and 9 seconds.




To find out your router default username and password continue reading

Hard reset NETGEAR Nighthawk AX4

To perform a hard reset of your Netgear Nighthawk AX4:


1. Find the Restore/Reset button on your router(usually located in a pinhole on the back of the router).
2. Use a paperclip or pencil tip to press and hold the button until the Power led starts to blink. It usually takes between 7 and 9 seconds.




To find out your router default username and password continue reading

Hard reset NETGEAR Orbi Whole Home Wi-Fi System (2019)

To perform a hard reset of your Netgear Orbi Whole Home Wi-Fi System (2019):


1. Find the Restore/Reset button on your router(usually located in a pinhole on the back of the router).
2. Use a paperclip or pencil tip to press and hold the button until the Power led starts to blink. It usually takes between 7 and 9 seconds.




To find out your router default username and password continue reading

Hard reset NETGEAR Orbi CBR40

To perform a hard reset of your Netgear Orbi CBR40:


1. Find the Restore/Reset button on your router(usually located in a pinhole on the back of the router).
2. Use a paperclip or pencil tip to press and hold the button until the Power led starts to blink. It usually takes between 7 and 9 seconds.




To find out your router default username and password continue reading

Hard reset NETGEAR Nighthawk 5G Mobile Hotspot

To perform a hard reset of your Netgear Nighthawk 5G Mobile Hotspot:


1. Find the Restore/Reset button on your router(usually located in a pinhole on the back of the router).
2. Use a paperclip or pencil tip to press and hold the button until the Power led starts to blink. It usually takes between 7 and 9 seconds.




To find out your router default username and password continue reading

Hard reset NETGEAR AX1800 4-Stream Mesh Extender

To perform a hard reset of your Netgear AX1800 4-Stream Mesh Extender:


1. Find the Restore/Reset button on your router(usually located in a pinhole on the back of the router).
2. Use a paperclip or pencil tip to press and hold the button until the Power led starts to blink. It usually takes between 7 and 9 seconds.




To find out your router default username and password continue reading

Hard reset NETGEAR Nighthawk WiFi 6 System

To perform a hard reset of your Netgear Nighthawk WiFi 6 System:


1. Find the Restore/Reset button on your router(usually located in a pinhole on the back of the router).
2. Use a paperclip or pencil tip to press and hold the button until the Power led starts to blink. It usually takes between 7 and 9 seconds.




To find out your router default username and password continue reading

Hard reset NETGEAR Orbi WiFi 6 AX6000

To perform a hard reset of your Netgear Orbi WiFi 6 AX6000:


1. Find the Restore/Reset button on your router(usually located in a pinhole on the back of the router).
2. Use a paperclip or pencil tip to press and hold the button until the Power led starts to blink. It usually takes between 7 and 9 seconds.




To find out your router default username and password continue reading

Hard reset NETGEAR Nighthawk Pro Gaming XR300

To perform a hard reset of your Netgear Nighthawk Pro Gaming XR300:


1. Find the Restore/Reset button on your router(usually located in a pinhole on the back of the router).
2. Use a paperclip or pencil tip to press and hold the button until the Power led starts to blink. It usually takes between 7 and 9 seconds.




To find out your router default username and password continue reading